-
- Continental Gas Burners
414 Series
- Their sealed-in construction allows maximum efficiency through close control of air/gas ratio, furnace atmosphere and furnace pressure, all contributing to better product quality. Fuels: ● LPG ● Natural gas ● Producer gas ● Blast furnace gas ● Biogas ● CBM ● Propane ● Coke oven gas Capacity range (kW) :435kW - 6250kW
- Read more
-
- Continental Gas Burners
42 Series
- 42 Burners are widely used on heat treat and nonferrous melting furnaces, kilns, ovens, air heaters, dryers, chemical process equipment, and other applications where superior temperature uniformity is required. Fuels: ● LPG ● Natural gas ● Producer gas ● Blast furnace gas ● Biogas ● CBM Capacity range (kW) :56.5kW - 1250kW
- Read more
-
- Continental Gas Burners
423 Series
- 423 nozzle-mix burners are the small version of Contitherm’s famous 42 series. They provide medium velocity flames with wide air/fuel ratio and turn down flexibility. For applications above 1900 F, the 425 modification is recommended Fuels: ● LPG ● Natural gas ● Biogas ● CBM Capacity range (kW) :17.5kW - 125kW
- Read more
-
- Continental Oill Burners
514 Series
- 514 Burners are rugged, maintenance- free, sealed-in burners for burning light or heavy oil for a wide variety of applications. Capable of efficient operation through a wide temperature range, they are equally at home on low temperature ovens and high temperature forge and melt furnaces. Fuels: ● HSD ● LDO ● Kerosene ● Furnace Oil Capacity range (kW) :435kW -…
- Read more
-
- Continental Oill Burners
52 Series
- Series 52 forward flame excess air oil burners are used in heat treatment, non-ferrous melting furnaces, kilns, ovens, air heaters, dryers and chemical process equipment. They are well suited where superior temperature uniformity is required (For higher temperature Service, use series 525). Fuels: ● HSD ● LDO ● Kerosene ● Pyro oil Capacity range (kW) :72.5kW - 1140kW
- Read more
-
- Continental Oill Burners
525 Series
- 525 Burners are designed specifically for higher temperature operations such as forge furnaces, ceramic kilns, metal and glass melters, heat treat furnaces, etc. They are the high temperature version of Contitherm’s 52 Fire • It is one of the most widely used Industrial burners in the world. Fuels: ● HSD ● LDO ● Kerosene Capacity range (kW) :17.5kW - 125kW
- Read more
-
- Heaters
Air Duct Heater
- Air heater is mainly used to the required air flow from the initial temperature of air heated to the required temperature up to 850 ℃. Has been widely applied to aerospace and weapons industry, chemical industry and universities and many research and production laboratories. Automatic temperature control and is particularly suitable for high temperature and high flow test systems and…
- Read more
-
- Heaters
Bobbin Heater
- Another type of heating element is the ceramic heating element. Various types are shown As below, As a rule this type of elements is fitted in a metal tube for applications In liquids, ovens (in this case a robust construction is essential), gas-and air heaters. Heater / Bobbin Heaters Manufactured out of imported fused Silica/Glass tube with replaceable refractory type…
- Read more
-
- Heaters
Boiler Heater
- Electric boilers are extremely popular as they are considered the most efficient method of heating water or steam, quiet and easy to install. Because there is no carbon emissions, electric boilers have very low maintenance costs with easily replaceable electric heating element (flange heaters). TLS - Offers boiler heaters that suit many different sizes and dimensions that customers need. If…
- Read more
-
- Accessories
Burner Accessories
- Contitherm Burners are supported with essential accessories required for improved performance and ease of installation and maintenance. Refractory Burner Block Flame Sensor Rod Flame Observation Port Direct Spark Ignitor Pilot Burner 4696 Pilot Burner 411-11 Pilot Burner 425 - T Pilot Burner 425-2T Small Continuous Pilot
- Read more
-
- Photo & U.V.Cells, Siemens Burner Controllers
Burner Controller MA55
- These are Oil Burner Controller with Sequence for Solenoid Valve with pre-purge and with pre and post Ignition Cycle. These are Suitable and Compatible with their Matching Photocell Model no 8209.
- Read more
-
- Photo & U.V.Cells, Siemens Burner Controllers
Burner Controller MA810
- These are Oil Burner Controller with Sequence for Solenoid Valve with pre-purge and with pre and post Ignition Cycle. These are Suitable and Compatible with their Matching Photocell Model no 8205. Also Burner Controller MA150.01 available on request.
- Read more
-
- Heaters
Ceramic Bend Heater
- TLS - Ceramic Band Heaters were developed & still being carried on to meet industrial requirements to withstand high temperature and for long life. They are ideally suited to comply with today's new resins, which calls for ever-increasing process temperature. Ceramic Band Heaters design consist of a helically wound resistance coil made from 80/20 nickel/chrome wire, evenly stretched and precisely…
- Read more
-
- Heaters
Circulation Heater
- TLS – Circulation Heaters also known as "in line heaters" use steel, stainless steel, titanium flanged immersion heaters in many applications. Circulation Heaters are fabricated using steel are often used with oil based applications. The majority of these circulation heaters are used in conjunction with a digital control panel and a probe that is positioned either in the bundle of…
- Read more
-
- Cofi Ignition Transformer & Accessories
Cofi Winding Type / Electronic Transformers
- Cofi Winding type / Electronic transformers available in single pole and two pole versions, different combinations of output voltages in kV, mA and ED ratings, with primary 230V & 110V. Models available are TRE, TRS and TRG series with intermittent and continuous (100%) duty ratings. Models are TRE 820, TRE 820P, TRS 830P, TRS 818PC, TRG 1020C, TRE 820 PISO…
- Read more
-
- Continental Dual Fuel Burners
CPG Series
- ● Adaptability to Low & High calorific value fuel. ● No moving parts and hence reduced maintenance ● Effective oil atomisation due to separate atomising air inlet. ● Oil control by a special Microtrol oil valve. ● Internal parts are easily removable for cleaning. ● First choice of Original Equipment Manufacturers Fuels: ● Producer gas ● Coke oven gas ●…
- Read more
-
- Continental Gas Burners
CPG Series
- ● Adaptability to Low & High calorific value fuel. ● No moving parts and hence reduced maintenance ● Effective oil atomisation due to separate atomising air inlet. ● Oil control by a special Microtrol oil valve. ● Internal parts are easily removable for cleaning. ● First choice of Original Equipment Manufacturers Fuels: ● Producer gas ● Coke oven gas ●…
- Read more
-
- Continental Oill Burners
CPG Series
- ● Adaptability to Low & High calorific value fuel. ● No moving parts and hence reduced maintenance ● Effective oil atomisation due to separate atomising air inlet. ● Oil control by a special Microtrol oil valve. ● Internal parts are easily removable for cleaning. ● First choice of Original Equipment Manufacturers Fuels: ● Producer gas ● Coke oven gas Capacity…
- Read more
-
- Photo & U.V.Cells, Siemens Burner Controllers
Danfoss Burner Controller
- Models OBC 82.10 and 84.10 available in stock. Microprocessor based controller offers Stable and Precise Timings. Suitable for One / two stage burners upto 30 kg/hr capacity with and without preheater.
- Read more
-
- Cofi Ignition Transformer & Accessories
Danfoss EBI Transformers
- These are new EBI series 4 transformers of electronic type D and these are lead fee and RoHs compliant. These are available for both Intermittent and Continuous Duty for single pole and two pole variety for small and medium Oil and Gas Burners. Models available are EBI4 - 052F 4030 / 4038 / 4034 / 4040 / 4036 and 4031…
- Read more
-
- Burner Nozzles
Danfoss Nozzles
- These are Oil Burner Nozzles for industrial applications for Light, Medium and Heavy Oils. Capacity in USgal/hr available from 0.40 upto 100 gph, calibrated at 100 psi pressure. Spray angles of 30, 45, 60, 80 and 90 degrees. Spray patterns of R, PLP and HO depending upon type of oil & applications can be used. HO nozzles are specifically designed…
- Read more
-
- Danfoss Oil Pumps n Suntec Oil Pump Accessories
Danfoss Oil Pumps
- Danfoss oil pumps are available in different models depending upon capacity in Lph, Pressure and type of Fuel being used. These are available in BFP, RSA and RSH series. These are having very high quality Viton Seals and also suitable for very Light Fuels like Kerosene and 10% Bio-diesel etc. Pump models BFP 21 R3/L3, BFP 21 R5/L5, BFP 41L3…
- Read more
-
- Photo & U.V.Cells, Siemens Burner Controllers
Danfoss Photocells
- Danfoss photo resistors of type LD and LDS Series are suitable for to detect flame in yellow flame burners. These are compatible with Danfoss OBC and BHO controllers and are available in black and red color indicating normal and high sensitivity of photo resistors. These are available in different Cable Lengths and with suitable Clamp & Flange for Mounting Purposes.
- Read more
-
- Photo & U.V.Cells, Siemens Burner Controllers
Dungs Controller MPA-41 Series
- These are Automatic Burner Controls with or without Pilot Gas in particular for Industrial Thermo-Processing Equipments. These are Fully Programmable Controllers and the Complete Sequence of Burner Operation can be programmed and locked as per customer requirements.
- Read more
-
- Monoblock Burners Spaers
Dungs Servomotors
- Dungs Servomotors are available for actuation of Dungs Butterfly Valves and Dungs Linear Flow Control Valves. These Servomotors are available in 3 Nm and 10 Nm Torque, with 230V AC, 110V AC and 24V DC. They can provide controls using cams, 4-20mA signal and 0 - 10V and position feedback using Potentiometer, 4-20mA signal and 0 - 10V.
- Read more
-
- Spares for Monobloc Burners
Ecoflame Burners spares
- Eco flam Spa is an Italian Company engaged in the manufacturing of monobloc burners of very good quality both suitable for oil and gas as a fuel. They are making right from very small capacity burners to large capacity burners to suit the needs of the different customers. These are made as Single Stage, Two Stage or Modulating Burners to…
- Read more
-
- Heaters
Electrical Process Heater
- TLS Electrical Process Heaters. TLS heaters are designed according the various customer demands. The heaters can be delivered as a flange mounting for tank heating or as an inline flow though heater for heating up: - Hot water - Thermal oil - Heavy fuel oil - Marine Diesel oil - Lubricating oil - Air & Gas Heating Explosion Proof Terminals…
- Read more
-
- Additional Accessories
Elet Plast Connectors
- Elet Plast Connectors - Set of male & female connectors - with options of 4pole, 5pole, 6 pole & 7pole connections, available for wiring in different applications providing very easy connection and safety of no mismatch during maintenance and repairs. These are Male Female set of connectors used in monbloc burners for ease of maintenance and to ensure correct wiring…
- Read more
-
- Heaters
Finned Stripe Heater
- Finned strip heaters, often considered component heaters, are a simple way of maximizing heat intensity and surface area to transfer heat effectively in an area. Steel fin strip heaters are an excellent heat transfer product and can be easily controlled by using either mechanical thermostat ot cost effective bimetal thermostats that can be installed on the surface of the heater.…
- Read more
-
- Heaters
Finned Tubular Heater
- TLS – Finned Heaters are used to carry out heating of solids, gases and liquids through thermal energy. For this purpose, our finned heaters are the best devices. Through our finned heaters, the heat is quickly carried out by thermal conduction. In this process, the heating elements of our heaters i.e. cartridges are kept in the direct contact with the…
- Read more
-
- Oil & Gas Burners
Gas Burner New GOM Series
- These are small and medium capacity gas burners suitable for both LPG and CNG as Fuels. These are best suited for small/medium gas heating applications. These have been designed specifically keeping in view the reasonable prices and by applying direct ignition system for these burners. These are available in single/two stage models. Models available are GOM-1N to GOM-4N. Capacity Ranges…
- Read more
-
- Noxmat Burners
HGBE SERIES
- The NOXMAT cold air burners of the HGBE series are available in a power range from 9 to 160 kW. They are suitable for cold and preheated air operation (up to 400 ° C air preheating). The large flame pulse, which is immediately present when the burner is started, improves the temperature uniformity in the thermoprocessing system..
- Read more
-
- Cofi Ignition Transformer & Accessories
Ignition Cable, Teflon Cable
- Silicone rubber high voltage ignition cable available in diameters of 4.7mm and 7mm. Teflon cable in diameter of 2.7mm. Different varieties of Copper Connecting Lugs, Insulation Caps etc as well as cable with readymade factory Crimped Lugs available in fixed lengths for safe operation.
- Read more
-
- Noxmat Burners
K-RHGB SERIES
- The ceramic NOXMAT recuperative burners of the K-RHGB series improve energy efficiency through the internal preheating of the combustion air. They are suitable for the direct and indirect heating of industrial furnaces up to a maximum application temperature of 1300 ° C and are available in a wide range of outputs from 9 to 250 kW.
- Read more
-
- Noxmat Burners
K-RHGB-RN SERIES “REMAT”
- The NOXMAT retrofit recuperator burner REMAT is characterized by its easy installation in existing systems, but also by higher energy efficiency, significantly reduced wear and less expensive maintenance.
- Read more
-
- Noxmat Burners
K-RHGBE SERIES
- The single-stage recuperator burners (K-RHGBE) are an inexpensive alternative to the classic recuperator burner. Suitable for direct and indirect heating of industrial furnaces up to an application temperature of 1,300 ° C and available in a wide range of outputs from 9 to 100 kW.
- Read more
-
- Burner Nozzles
Monarch AAMA nozzle kit
- AAMA nozzle is the front portion of the AAMA kit which is used for façade testing in the building walls, from where the water is sprayed in a particular pattern to test whether there is any leakage inside the wall while fabricating the same. Once there is no leakage, it is ensured that the joint made is leak proof. This…
- Read more
-
- Burner Nozzles
Monarch Nozzles
- Oil burner nozzles of type OD series are designed for Commercial High Pressure Burners operating with Light and Heavy oil. Different Spray Angles of 30, 45, 60, 80 degrees Spray patterns of Hollow (H), Solid (S), Semi solid (B). These are made of Brass with SS hardened tip on top. These nozzles are available Ex. Stock with us.
- Read more
-
- Oil & Gas Burners
Mono Bloc Gas Burners
- Mono Bloc Gas Burners These are very small capacity mono-bloc gas burners suitable for both LPG and CNG as fuels. These are available in Single Stage Models. Models available are KSY 1.6 and KSY 2.3. Capacity ranges from 25,000 to 35,000 kcal/hr. These are fitted with very standard and high quality components and bought out items.
- Read more
-
- Oil & Gas Burners
Oil Burner OM Series
- Oil Burner OM Series These are medium capacity mono-bloc oil burners suitable for light oil , bio-diesel and kerosene as fuels. These are suitable for Hot Water Boilers, Steam Boilers, Ovens, Furnaces, Food Processing Equipments, Bakery and Biscuit Ovens etc. Models available are OM-1N upto OM-4N in single stage and two stage options. Capacity ranges from 4 lph to 48…
- Read more
-
- Oil & Gas Burners
Oil Burner TC Series
- These are small capacity mono-bloc oil fired burners suitable for Light Oil, Kerosene etc as Fuels.These are most suitable for Hot Water Boilers, Heating Units, Kitchen Ovens etc.Models available are TC-10, TC-20, and TC-30.Capacity range from 1 lph to 6 lph oil consumption.These burners are fitted with Special electro-magnetic Reciprocating Pump which is having a longer life than normal Gear…
- Read more
-
- Monoblock Burners Spaers
Oil Filters
- These are small cup type Oil Filters used for Small Burners for light oil filtration just before the entry of oil to the burners. These are available different sizes from 1/4" and above with bottom Plastic Body / Aluminum Body. These filters elements are made up of SS Wire Mesh and it can be opened up and cleaned as required.
- Read more
-
- Heaters
Pipe Heater
- TLS - Pipe heaters use supportive ceramics resistant to high thermal heat that provide mechanical support to coils. Thermocouples can also be used to relay temperature readings to a digital controller that helps regulate the heat intensity. TLS - Pipe Heaters are especially constructed to fit inside standard of pipes. Specifically designed to fit in tank applications that require extremely…
- Read more
-
- Noxmat Burners
RHGB SERIES
- The classic NOXMAT recuperator burners (RHGB) improve energy efficiency through the internal preheating of the combustion air. They are suitable for the direct and indirect heating of industrial furnaces up to an application temperature of 1150 ° C and are available in a wide range of outputs from 7 to 250 kW.
- Read more
-
- Noxmat Burners
RHGBS SERIES “ETAMAT”
- The high efficient NOXMAT recuperator burner ETAMAT sets new standards in energy savings with a combustion efficiency of up to 90%. Available in a power range from 15 to 35 kW, burners of this series achieve the highest possible heat recovery thanks to a special recuperator.
- Read more
-
- Continental Oill Burners
Self Proportioning Oil Burner (SPOB)
- Considerable fuel savings compared to other conventional burners Single lever to control fuel and air flow simultaneously Internal parts easily removed for cleaning First choice of original equipment manufacturers. Fuels: ● HSD ● LDO ● Kerosene ● Pyro oil ● Furnace Oil Capacity range (kW) :117.5kW to 1400kW
- Read more
-
- Continental Dual Fuel Burners
Series 614
- Contitherm Series 614 Dual-Fuel Burners are nozzle mix, sealed in burners for gas, light oil, or heavy oil. Capable of efficient operation throughout a wide temperature range. These burners are equally at home on low temperature ovens and high temperature forge and melting furnaces Fuels: ● LPG ● Natural gas ● Producer gas ● Blast furnace gas ● Biogas ●…
- Read more
-
- Continental Gas Burners
Series 614
- Contitherm Series 614 Dual-Fuel Burners are nozzle mix, sealed in burners for gas, light oil, or heavy oil. Capable of efficient operation throughout a wide temperature range. These burners are equally at home on low temperature ovens and high temperature forge and melting furnaces Fuels: ● LPG ● Natural gas ● Producer gas ● Blast furnace gas ● Biogas ●…
- Read more
-
- Continental Oill Burners
Series 614
- Contitherm Series 614 Dual-Fuel Burners are nozzle mix, sealed in burners for gas, light oil, or heavy oil. Capable of efficient operation throughout a wide temperature range. These burners are equally at home on low temperature ovens and high temperature forge and melting furnaces Fuels: ● LPG ● Natural gas ● Producer gas ● Blast furnace gas ● Biogas ●…
- Read more
-
- Continental Dual Fuel Burners
Series 62
- Contitherm Series 62 Dual Fuel Burners are designed to give maintenance free operation using heavy oil, light oil or gas. It has a heavy cast iron body of clean design that avoids clogging even when used on tough jobs such as forge furnaces using heavy oil. Recommended Fuels: ● HSD ● LDO ● Kerosene ● Pyro oil ● Furnace Oil…
- Read more
-
- Continental Gas Burners
Series 62
- Contitherm Series 62 Dual Fuel Burners are designed to give maintenance free operation using heavy oil, light oil or gas. It has a heavy cast iron body of clean design that avoids clogging even when used on tough jobs such as forge furnaces using heavy oil. Recommended Fuels: ● HSD ● LDO ● Kerosene ● Pyro oil ● Furnace oil…
- Read more
-
- Continental Oill Burners
Series 62
- Contitherm Series 62 Dual Fuel Burners are designed to give maintenance free operation using heavy oil, light oil or gas. It has a heavy cast iron body of clean design that avoids clogging even when used on tough jobs such as forge furnaces using heavy oil. Recommended Fuels: ● HSD ● LDO ● Kerosene ● Pyro oil ● Furnace Oil…
- Read more
-
- Continental Dual Fuel Burners
Series 635
- WIDE STABILITY RANGE - From 15% excess fuel to 400% excess air. UNIT CONSTRUCTION - The high temperature tile is secured in the main body section with no requirement of extra support. EASY INSPECTION/SERVICE - Air and gas piping need not be removed for complete access to internals Recommended Fuels: ● LPG ● Natural gas ● Diesel Capacity range (kW)…
- Read more
-
- Continental Gas Burners
Series 635
- Contitherm Series 635 Burners are High Velocity burners which are best suited for applications requiring high velocity flames. WIDE STABILITY RANGE - From 15% excess fuel to 400% excess air. UNIT CONSTRUCTION - The high temperature tile is secured in the main body section with no requirement of extra support. EASY INSPECTION/SERVICE - Air and gas piping need not be…
- Read more
-
- Continental Oill Burners
Series 635
- Contitherm Series 635 Burners are High Velocity burners which are best suited for applications requiring high velocity flames. WIDE STABILITY RANGE - From 15% excess fuel to 400% excess air. UNIT CONSTRUCTION - The high temperature tile is secured in the main body section with no requirement of extra support. EASY INSPECTION/SERVICE - Air and gas piping need not be…
- Read more
-
- Continental Dual Fuel Burners
Series 642
- Contitherm Series 642 Dual-Fuel Burners are widely used on heat treat and non- ferrous melting furnaces, kilns, ovens, air heaters, dryers, chemical process equipment, and other applications where superior temperature uniformity is required. (For higher temperature service, specify 625 Burners.) Fuels: ● LPG ● Natural gas ● Producer gas ● Blast furnace gas ● Biogas ● HSD ● LDO ●…
- Read more
-
- Continental Gas Burners
Series 642
- Contitherm Series 642 Dual-Fuel Burners are widely used on heat treat and non- ferrous melting furnaces, kilns, ovens, air heaters, dryers, chemical process equipment, and other applications where superior temperature uniformity is required. (For higher temperature service, specify 625 Burners.) Fuels: ● LPG ● Natural gas ● Producer gas ● Blast furnace gas ● Biogas ● HSD ● LDO ●…
- Read more
-
- Continental Oill Burners
Series 642
- Contitherm Series 642 Dual-Fuel Burners are widely used on heat treat and non- ferrous melting furnaces, kilns, ovens, air heaters, dryers, chemical process equipment, and other applications where superior temperature uniformity is required. (For higher temperature service, specify 625 Burners.) Fuels: ● LPG ● Natural gas ● Producer gas ● Blast furnace gas ● Biogas ● HSD ● LDO ●…
- Read more
-
- Photo & U.V.Cells, Siemens Burner Controllers
Siemens Burner Controllers, Models
- Siemens Burner Controllers, Models LOA 24, LME 21 / 22, LAL 1.25, LAL 2.25, LFL 1.333, LFL 1.322, LFL 1.635, LFL 1.335 etc are available Ex. Stock with us. Both 230V and 110V
- Read more
-
- Photo & U.V.Cells, Siemens Burner Controllers
Siemens Burner Controllers, Photocells, U. V. Cells LOA, LMO, LME, LAL and LFL series
- These are oil and gas Burner Controllers, Photocells, U. V. Cells suitable for small, medium and large capacity Burners with different combinations of burner program sequences as per burner mfrs requirements. These are coming with Different Model Nos and Combinations based on Parameters and Time Sequences. These are Compatible with different photocells and U.V. cells of Siemens.
- Read more
-
- Photo & U.V.Cells, Siemens Burner Controllers
Siemens Photocells / U.V.Cells QRB 3, QRA 2 Series
- These photocells are Compatible and can be used with Respective Siemens Controllers as above for different oil and Gas Burner Applications and their requirements. Model QRA 2 is available Ex. Stock with us.
- Read more
-
- Photo & U.V.Cells, Siemens Burner Controllers
Siemens Photocells QRB 1 Black and Red Color
- These photocells are used to Detect the Presence of Flame in the Yellow Flame Burner and can be used along with Controller LOA 24. Model QRB 1 is available Ex. Stock with us.
- Read more
-
- Monoblock Burners Spaers
Siemens Servomotors
- Wide Range and Varieties of Siemens make Servomotors are available in different series like SQN, SQM with variety of different combinations for different makes of burners and different applications and specifications. Some popular models are kept in ready stock by us, rest can be ordered against specific request from customers. Their position can be controlled by means of Mechanical Cams,…
- Read more
-
- Photo & U.V.Cells, Siemens Burner Controllers
Siemens U.V.Cell QRA 10C and QRA 10MC
- These are Ultra Violet Cells provided with Electronic Circuit and Housing given for additional protection of the cell inside with a provision to use air for cooling purposes to enhance the life of the cell. These are of Normal and High Sensitivity as per requirements of the Burner and the Flame Intensity. Models QRA 10C and QRA 10 MC, QRA…
- Read more
-
- Spares for Monobloc Burners
Spares for Monobloc Burners
- Different Monobloc Burners of Reputed Brands are being used in India for different Oil and Gas Heating Applications. Most Popular Brands are : ECOFLAM, RIELLO, BENTONE, BALTUR, KLOCKNER, NU-WAY, UNIGAS, FBR, BLOW THERM, WEISHAUPT, OLYMPIA, OROFLAM, etc. We can cater to the spares and replacement parts requirements of all these burners based upon the feedback received from the the customers…
- Read more
-
- Heaters
Storage Tank (Immersion) Heater
- TLS Heaters consists of a cylindrical Housing of welded steel plate in which immersion Heaters are inserted. The standard equipment includes Immersion Heaters, thermostat and indicating bulb. When thermostat cannot carry the total heater current suitable Air Break Contactor is also supplied. Dial Thermometers and other accessories can be also supplied on request.
- Read more
-
- Heaters
Straight Finned Heater
- Based upon our team of skilled professionals and advanced technology versed manufacturing machinery, we manufacture an unsurpassed range of straight finned heaters. They are designed and processed in varied designs, sizes and finishes to exactly match with the requirements of clients belonging to different industries.
- Read more
-
- Heaters
Stripe Heater
- Strip heaters, often considered component heaters, are a simple way of using surface area to transfer heat effectively. Steel strip heaters are an excellent heat transfer product and can be easily controlled by using either mechanical thermostat to cost effective bimetal thermostats that can be installed on the surface you are heating. Mounting holes are useful to mount the heaters…
- Read more
-
- Additional Accessories
Suntec Oil Pump Accessories
- These are small but important parts available and can be used in conjunction with these oil pumps like, solenoid coils, hubs / plates for conversion from 32 to 54mm, shaft seals kits, cover kits, plugin cables, small couplings etc. Pump Models AS 47 C/A, AS 67 C/A, AN 67 A/B/C, AE 67 / 97, AT2 45 C/A, A2L 75 CK,…
- Read more
-
- Danfoss Oil Pumps n Suntec Oil Pump Accessories
Suntec Oil Pump Accessories
- These are small but Important Parts available. Can be used in conjunction with these oil pumps like, solenoid coils, hubs / plates for conversion from 32 to 54mm, shaft seals kits, cover kits, plugin cables, small couplings etc.
- Read more
-
- Danfoss Oil Pumps n Suntec Oil Pump Accessories
Suntec Oil Pumps AS, AN, AE, AT2, A2L, D, E Series
- These are all Different Varieties and Models of Standard Range of low, medium and high capacity pumps available for different burners for wide variety of oils from kerosene, bio-diesel, HSD, Furnace oil etc. These pump models are having Different Direction of Rotation i.e. Clockwise & Anticlockwise, with Different Features and Connection Ports. Pump models AS 47 C/A, AS 67 C/A,…
- Read more
-
- Danfoss Oil Pumps n Suntec Oil Pump Accessories
Suntec Oil Pumps T and TA series
- These pumps are used for Large Burners with Heavy Fuel Oils like Furnace Oil etc with oil temperature ranging upto 120??C. Popular models are TA 2C, TA 3C, TA 4C, T3 C, T4 C and T5 C are available Ex. Stock with us.
- Read more
-
- Heaters
Tubular (Tube) Heater
- The most versatile of all electric heating elements, the tubular heater is capable of being formed into virtually any configuration. The basic design consists of a helical coil of nickel-chromium resistance wire embedded in a magnesium oxide insulating material. The cross section design of the metal sheath assures maximum strength and rigidity. The tubular design also permits ready bending and…
- Read more
-
- Heaters
U/M Finned Heater
- We take pride to become the leading manufacturers of proven grade of U/M finned heaters at cost effective price. We offer our heaters with excellent performance, longer service life and higher resistance. The fabricated designs of our heaters make them enable to use in a diverse range of industry applications. In addition, they have sturdy designs and blended technological features,…
- Read more
-
- Vapa Burners(IR)
VC-9 (Ceramic Surface Infrared Burner)
- Technical Data Dimensions: 17 x 24 x 5cm BTU Range: 65,000 – 100,000 BTU/H (Depending on gas pressure) Gas Type: LPG - Butane or Propane Recommended Gas Pressure: 100 mbar – 1 bar Burner House & Frame Material: Zincore Steel Core Construction: Drawn Steel Cover Mesh: 1100 °C Heat Resisting Alloy Gas Inlet: 1/4” Copper Pipe Net Weight: 2Kg Specifications…
- Read more
-
- Vapa Burners(IR)
VLP
- Technical Data Dimensions: 17 x 24 x 5cm BTU Range: 25,000 – 35,000 BTU/H Gas Type: LPG or Natural Gas Burner house and frame Material Zincore Core Construction: Drawn Steel Cover Mesh: 1100 °C Heat Resisting Alloy Gas Inlet: ¼” Copper Pipe Net Weight: 1.3Kg Specifications - The VLP is a metallic surface burner - Designed for applications that required…
- Read more
-
- Vapa Burners(IR)
VM-1 (Metallic Surface Infrared Burner)
- Technical Data Dimensions: 17 x 24 x 5cm BTU Range: 65,000 – 110,000 BTU/H (Depending on gas pressure) Gas Type: LPG - Butane or Propane Recommended Gas Pressure: 100 mbar – 1.5 bar Burner House Material: Zincore Steel Burner Frame: Stainless Steel Industrial Grade 304 Core Construction: Drawn Steel Cover Mesh: 1100 °C Heat Resisting Alloy Gas Inlet: 1/4” Copper…
- Read more
-
- Vapa Burners(IR)
VML (Custom Made Metallic Surface Infrared Burners)
- Specifications - Custom made burners for chicken rotisseries and other cooking and heating applications - Length ranges between 35 and 85 cm - Width can be chosen to be 8, 10 or 13 cm - Inlet extended venture can be selected - The burner house material is Zincore - All burners are equipped with heavy duty metallic surfaces Our Products…
- Read more
-
- Noxmat Burners
WIEDEMANN SERIES
- NOXMAT continues the products of the burner manufacturer Wiedemann. These are tubular recuperative burners for non-ferrous metallurgy, cold air burners and flat flame burners.
- Read more
Menu
Menu
