-
- Continental Gas Burners
414 Series
- Their sealed-in construction allows maximum efficiency through close control of air/gas ratio, furnace atmosphere and furnace pressure, all contributing to better product quality. Fuels: ● LPG ● Natural gas ● Producer gas ● Blast furnace gas ● Biogas ● CBM ● Propane ● Coke oven gas Capacity range (kW) :435kW - 6250kW
- Read more
-
- Continental Gas Burners
42 Series
- 42 Burners are widely used on heat treat and nonferrous melting furnaces, kilns, ovens, air heaters, dryers, chemical process equipment, and other applications where superior temperature uniformity is required. Fuels: ● LPG ● Natural gas ● Producer gas ● Blast furnace gas ● Biogas ● CBM Capacity range (kW) :56.5kW - 1250kW
- Read more
-
- Continental Gas Burners
423 Series
- 423 nozzle-mix burners are the small version of Contitherm’s famous 42 series. They provide medium velocity flames with wide air/fuel ratio and turn down flexibility. For applications above 1900 F, the 425 modification is recommended Fuels: ● LPG ● Natural gas ● Biogas ● CBM Capacity range (kW) :17.5kW - 125kW
- Read more
-
- Continental Oill Burners
514 Series
- 514 Burners are rugged, maintenance- free, sealed-in burners for burning light or heavy oil for a wide variety of applications. Capable of efficient operation through a wide temperature range, they are equally at home on low temperature ovens and high temperature forge and melt furnaces. Fuels: ● HSD ● LDO ● Kerosene ● Furnace Oil Capacity range (kW) :435kW -…
- Read more
-
- Continental Oill Burners
52 Series
- Series 52 forward flame excess air oil burners are used in heat treatment, non-ferrous melting furnaces, kilns, ovens, air heaters, dryers and chemical process equipment. They are well suited where superior temperature uniformity is required (For higher temperature Service, use series 525). Fuels: ● HSD ● LDO ● Kerosene ● Pyro oil Capacity range (kW) :72.5kW - 1140kW
- Read more
-
- Continental Oill Burners
525 Series
- 525 Burners are designed specifically for higher temperature operations such as forge furnaces, ceramic kilns, metal and glass melters, heat treat furnaces, etc. They are the high temperature version of Contitherm’s 52 Fire • It is one of the most widely used Industrial burners in the world. Fuels: ● HSD ● LDO ● Kerosene Capacity range (kW) :17.5kW - 125kW
- Read more
-
- Heaters
Air Duct Heater
- Air heater is mainly used to the required air flow from the initial temperature of air heated to the required temperature up to 850 ℃. Has been widely applied to aerospace and weapons industry, chemical industry and universities and many research and production laboratories. Automatic temperature control and is particularly suitable for high temperature and high flow test systems and…
- Read more
-
- Heaters
Bobbin Heater
- Another type of heating element is the ceramic heating element. Various types are shown As below, As a rule this type of elements is fitted in a metal tube for applications In liquids, ovens (in this case a robust construction is essential), gas-and air heaters. Heater / Bobbin Heaters Manufactured out of imported fused Silica/Glass tube with replaceable refractory type…
- Read more
-
- Heaters
Boiler Heater
- Electric boilers are extremely popular as they are considered the most efficient method of heating water or steam, quiet and easy to install. Because there is no carbon emissions, electric boilers have very low maintenance costs with easily replaceable electric heating element (flange heaters). TLS - Offers boiler heaters that suit many different sizes and dimensions that customers need. If…
- Read more
-
- Accessories
Burner Accessories
- Contitherm Burners are supported with essential accessories required for improved performance and ease of installation and maintenance. Refractory Burner Block Flame Sensor Rod Flame Observation Port Direct Spark Ignitor Pilot Burner 4696 Pilot Burner 411-11 Pilot Burner 425 - T Pilot Burner 425-2T Small Continuous Pilot
- Read more
-
- Photo & U.V.Cells, Siemens Burner Controllers
Burner Controller MA55
- These are Oil Burner Controller with Sequence for Solenoid Valve with pre-purge and with pre and post Ignition Cycle. These are Suitable and Compatible with their Matching Photocell Model no 8209.
- Read more
-
- Photo & U.V.Cells, Siemens Burner Controllers
Burner Controller MA810
- These are Oil Burner Controller with Sequence for Solenoid Valve with pre-purge and with pre and post Ignition Cycle. These are Suitable and Compatible with their Matching Photocell Model no 8205. Also Burner Controller MA150.01 available on request.
- Read more
-
- Heaters
Ceramic Bend Heater
- TLS - Ceramic Band Heaters were developed & still being carried on to meet industrial requirements to withstand high temperature and for long life. They are ideally suited to comply with today's new resins, which calls for ever-increasing process temperature. Ceramic Band Heaters design consist of a helically wound resistance coil made from 80/20 nickel/chrome wire, evenly stretched and precisely…
- Read more
-
- Heaters
Circulation Heater
- TLS – Circulation Heaters also known as "in line heaters" use steel, stainless steel, titanium flanged immersion heaters in many applications. Circulation Heaters are fabricated using steel are often used with oil based applications. The majority of these circulation heaters are used in conjunction with a digital control panel and a probe that is positioned either in the bundle of…
- Read more
-
- Cofi Ignition Transformer & Accessories
Cofi Winding Type / Electronic Transformers
- Cofi Winding type / Electronic transformers available in single pole and two pole versions, different combinations of output voltages in kV, mA and ED ratings, with primary 230V & 110V. Models available are TRE, TRS and TRG series with intermittent and continuous (100%) duty ratings. Models are TRE 820, TRE 820P, TRS 830P, TRS 818PC, TRG 1020C, TRE 820 PISO…
- Read more
-
- Continental Dual Fuel Burners
CPG Series
- ● Adaptability to Low & High calorific value fuel. ● No moving parts and hence reduced maintenance ● Effective oil atomisation due to separate atomising air inlet. ● Oil control by a special Microtrol oil valve. ● Internal parts are easily removable for cleaning. ● First choice of Original Equipment Manufacturers Fuels: ● Producer gas ● Coke oven gas ●…
- Read more
-
- Continental Gas Burners
CPG Series
- ● Adaptability to Low & High calorific value fuel. ● No moving parts and hence reduced maintenance ● Effective oil atomisation due to separate atomising air inlet. ● Oil control by a special Microtrol oil valve. ● Internal parts are easily removable for cleaning. ● First choice of Original Equipment Manufacturers Fuels: ● Producer gas ● Coke oven gas ●…
- Read more
-
- Continental Oill Burners
CPG Series
- ● Adaptability to Low & High calorific value fuel. ● No moving parts and hence reduced maintenance ● Effective oil atomisation due to separate atomising air inlet. ● Oil control by a special Microtrol oil valve. ● Internal parts are easily removable for cleaning. ● First choice of Original Equipment Manufacturers Fuels: ● Producer gas ● Coke oven gas Capacity…
- Read more
-
- Photo & U.V.Cells, Siemens Burner Controllers
Danfoss Burner Controller
- Models OBC 82.10 and 84.10 available in stock. Microprocessor based controller offers Stable and Precise Timings. Suitable for One / two stage burners upto 30 kg/hr capacity with and without preheater.
- Read more
-
- Cofi Ignition Transformer & Accessories
Danfoss EBI Transformers
- These are new EBI series 4 transformers of electronic type D and these are lead fee and RoHs compliant. These are available for both Intermittent and Continuous Duty for single pole and two pole variety for small and medium Oil and Gas Burners. Models available are EBI4 - 052F 4030 / 4038 / 4034 / 4040 / 4036 and 4031…
- Read more
-
- Burner Nozzles
Danfoss Nozzles
- These are Oil Burner Nozzles for industrial applications for Light, Medium and Heavy Oils. Capacity in USgal/hr available from 0.40 upto 100 gph, calibrated at 100 psi pressure. Spray angles of 30, 45, 60, 80 and 90 degrees. Spray patterns of R, PLP and HO depending upon type of oil & applications can be used. HO nozzles are specifically designed…
- Read more
-
- Danfoss Oil Pumps n Suntec Oil Pump Accessories
Danfoss Oil Pumps
- Danfoss oil pumps are available in different models depending upon capacity in Lph, Pressure and type of Fuel being used. These are available in BFP, RSA and RSH series. These are having very high quality Viton Seals and also suitable for very Light Fuels like Kerosene and 10% Bio-diesel etc. Pump models BFP 21 R3/L3, BFP 21 R5/L5, BFP 41L3…
- Read more
-
- Photo & U.V.Cells, Siemens Burner Controllers
Danfoss Photocells
- Danfoss photo resistors of type LD and LDS Series are suitable for to detect flame in yellow flame burners. These are compatible with Danfoss OBC and BHO controllers and are available in black and red color indicating normal and high sensitivity of photo resistors. These are available in different Cable Lengths and with suitable Clamp & Flange for Mounting Purposes.
- Read more
Menu
Menu
