-
- Photo & U.V.Cells, Siemens Burner Controllers
Dungs Controller MPA-41 Series
- These are Automatic Burner Controls with or without Pilot Gas in particular for Industrial Thermo-Processing Equipments. These are Fully Programmable Controllers and the Complete Sequence of Burner Operation can be programmed and locked as per customer requirements.
- Read more
-
- Monoblock Burners Spaers
Dungs Servomotors
- Dungs Servomotors are available for actuation of Dungs Butterfly Valves and Dungs Linear Flow Control Valves. These Servomotors are available in 3 Nm and 10 Nm Torque, with 230V AC, 110V AC and 24V DC. They can provide controls using cams, 4-20mA signal and 0 - 10V and position feedback using Potentiometer, 4-20mA signal and 0 - 10V.
- Read more
-
- Spares for Monobloc Burners
Ecoflame Burners spares
- Eco flam Spa is an Italian Company engaged in the manufacturing of monobloc burners of very good quality both suitable for oil and gas as a fuel. They are making right from very small capacity burners to large capacity burners to suit the needs of the different customers. These are made as Single Stage, Two Stage or Modulating Burners to…
- Read more
-
- Heaters
Electrical Process Heater
- TLS Electrical Process Heaters. TLS heaters are designed according the various customer demands. The heaters can be delivered as a flange mounting for tank heating or as an inline flow though heater for heating up: - Hot water - Thermal oil - Heavy fuel oil - Marine Diesel oil - Lubricating oil - Air & Gas Heating Explosion Proof Terminals…
- Read more
-
- Additional Accessories
Elet Plast Connectors
- Elet Plast Connectors - Set of male & female connectors - with options of 4pole, 5pole, 6 pole & 7pole connections, available for wiring in different applications providing very easy connection and safety of no mismatch during maintenance and repairs. These are Male Female set of connectors used in monbloc burners for ease of maintenance and to ensure correct wiring…
- Read more
-
- Heaters
Finned Stripe Heater
- Finned strip heaters, often considered component heaters, are a simple way of maximizing heat intensity and surface area to transfer heat effectively in an area. Steel fin strip heaters are an excellent heat transfer product and can be easily controlled by using either mechanical thermostat ot cost effective bimetal thermostats that can be installed on the surface of the heater.…
- Read more
-
- Heaters
Finned Tubular Heater
- TLS – Finned Heaters are used to carry out heating of solids, gases and liquids through thermal energy. For this purpose, our finned heaters are the best devices. Through our finned heaters, the heat is quickly carried out by thermal conduction. In this process, the heating elements of our heaters i.e. cartridges are kept in the direct contact with the…
- Read more
-
- Oil & Gas Burners
Gas Burner New GOM Series
- These are small and medium capacity gas burners suitable for both LPG and CNG as Fuels. These are best suited for small/medium gas heating applications. These have been designed specifically keeping in view the reasonable prices and by applying direct ignition system for these burners. These are available in single/two stage models. Models available are GOM-1N to GOM-4N. Capacity Ranges…
- Read more
-
- Noxmat Burners
HGBE SERIES
- The NOXMAT cold air burners of the HGBE series are available in a power range from 9 to 160 kW. They are suitable for cold and preheated air operation (up to 400 ° C air preheating). The large flame pulse, which is immediately present when the burner is started, improves the temperature uniformity in the thermoprocessing system..
- Read more
-
- Cofi Ignition Transformer & Accessories
Ignition Cable, Teflon Cable
- Silicone rubber high voltage ignition cable available in diameters of 4.7mm and 7mm. Teflon cable in diameter of 2.7mm. Different varieties of Copper Connecting Lugs, Insulation Caps etc as well as cable with readymade factory Crimped Lugs available in fixed lengths for safe operation.
- Read more
-
- Noxmat Burners
K-RHGB SERIES
- The ceramic NOXMAT recuperative burners of the K-RHGB series improve energy efficiency through the internal preheating of the combustion air. They are suitable for the direct and indirect heating of industrial furnaces up to a maximum application temperature of 1300 ° C and are available in a wide range of outputs from 9 to 250 kW.
- Read more
-
- Noxmat Burners
K-RHGB-RN SERIES “REMAT”
- The NOXMAT retrofit recuperator burner REMAT is characterized by its easy installation in existing systems, but also by higher energy efficiency, significantly reduced wear and less expensive maintenance.
- Read more
-
- Noxmat Burners
K-RHGBE SERIES
- The single-stage recuperator burners (K-RHGBE) are an inexpensive alternative to the classic recuperator burner. Suitable for direct and indirect heating of industrial furnaces up to an application temperature of 1,300 ° C and available in a wide range of outputs from 9 to 100 kW.
- Read more
-
- Burner Nozzles
Monarch AAMA nozzle kit
- AAMA nozzle is the front portion of the AAMA kit which is used for façade testing in the building walls, from where the water is sprayed in a particular pattern to test whether there is any leakage inside the wall while fabricating the same. Once there is no leakage, it is ensured that the joint made is leak proof. This…
- Read more
-
- Burner Nozzles
Monarch Nozzles
- Oil burner nozzles of type OD series are designed for Commercial High Pressure Burners operating with Light and Heavy oil. Different Spray Angles of 30, 45, 60, 80 degrees Spray patterns of Hollow (H), Solid (S), Semi solid (B). These are made of Brass with SS hardened tip on top. These nozzles are available Ex. Stock with us.
- Read more
-
- Oil & Gas Burners
Mono Bloc Gas Burners
- Mono Bloc Gas Burners These are very small capacity mono-bloc gas burners suitable for both LPG and CNG as fuels. These are available in Single Stage Models. Models available are KSY 1.6 and KSY 2.3. Capacity ranges from 25,000 to 35,000 kcal/hr. These are fitted with very standard and high quality components and bought out items.
- Read more
-
- Oil & Gas Burners
Oil Burner OM Series
- Oil Burner OM Series These are medium capacity mono-bloc oil burners suitable for light oil , bio-diesel and kerosene as fuels. These are suitable for Hot Water Boilers, Steam Boilers, Ovens, Furnaces, Food Processing Equipments, Bakery and Biscuit Ovens etc. Models available are OM-1N upto OM-4N in single stage and two stage options. Capacity ranges from 4 lph to 48…
- Read more
-
- Oil & Gas Burners
Oil Burner TC Series
- These are small capacity mono-bloc oil fired burners suitable for Light Oil, Kerosene etc as Fuels.These are most suitable for Hot Water Boilers, Heating Units, Kitchen Ovens etc.Models available are TC-10, TC-20, and TC-30.Capacity range from 1 lph to 6 lph oil consumption.These burners are fitted with Special electro-magnetic Reciprocating Pump which is having a longer life than normal Gear…
- Read more
-
- Monoblock Burners Spaers
Oil Filters
- These are small cup type Oil Filters used for Small Burners for light oil filtration just before the entry of oil to the burners. These are available different sizes from 1/4" and above with bottom Plastic Body / Aluminum Body. These filters elements are made up of SS Wire Mesh and it can be opened up and cleaned as required.
- Read more
Menu
Menu
