-
- Pressure Guages
111.10 Series
- Simple dial and a clear scale improve the legibility of control panels. The 111.10 series includes pressure gauges which employ the Bourdon tube measuring system, designed for applications in pneumatics, HVAC, as well as in medical engineering. Measuring ranges of instruments available from TME reach up to 400bar(1.6 and 2.5 accuracy classes), they can handle agents with temperatures from -20°C…
- Read more
-
- Pressure Guages
111.12 series
- Devices from the 111.12 series offer similar parameters to those from the 111.10 series described above, however, they are equipped with rear connections with G 1/8 B, M10, M12 or M20 threads. A membrane separatorhas been used here as well, making it possible to work with viscous substances. Gauges are available in diameters from 40mm to 100mm. They can be…
- Read more
-
- Pressure Guages
111.20 series
- The series is durable thanks to the steel and aluminium construction. The 111.20 series includes analogue steel pressure gauges with increased durability. Their measuring ranges span from 0..0.6bar to 0…600bar. They can operate in ambient temperatures ranging from -40°C to 60°C and media with a maximum temperature of 60°C. The primary applications of the products include the HVAC and gas…
- Read more
-
- Pressure Guages
111.22 series
- Pressure gauges from the 111.22 series are designed to be used in industrial heating installations. They are adapted to measure pressure of media whose temperature may reach even 200°C, their measuring ranges span from 0..1bar to 0…600bar. The measurement is carried out using a Bourdon spring (up to 60bar) or a coil spring (in other cases). The products are manufactured…
- Read more
-
- Pressure Guages
113.53 series
- Liquid-filled pressure gauges are resistant to shock and vibration One important distinctive feature of the products from the 113.53 series is their mechanical resistance. The construction is based on a stainless steel casing filled with liquid (glycerine), which makes the pressure gauges resistant to shock and vibration. The pressure gauges are IP65-rated, which means that they are designed in such…
- Read more
-
- Ash Handling System
ash conditioning
- twin-shaft paddle type fly ash conditioning systems used for wetting and mixing of ash and other dusty, abrasive materials. variable-speed rotary feeder precisely meters ash flow. totally enclosed twin-shaft mixer uses low speed counter-rotating mixing action to thoroughly blend and mix ash as it is moistened by wetting sprays.
- Read more
-
- Ash Handling System
ash storage
- shop-assembled or field-welded surge bins and storage silos including mechanical or pneumatic silo extraction systems, level detection, fire- and explosion- suppression systems.
- Read more
-
- Boiler Fuel feeding & Handling
Boiler Fuel feeding & Handling
- SACO had Technological advances features in its ash handling equipments can change the way products are handled throughout your ash handling system considering the high temperature of ash material. Implementing a conveyor system and our extensive products in ash handling are Jacketed Screw Conveyors, Belt/Chain type Submerge Ash Conveyors, High temperature Belt conveyors, Bucket Elevators, Slat Chain Conveyor, Screw Conveyor,…
- Read more
-
- Solid Fuel Handling System
Coal Washeries
- A coal preparation plant is a facility that washes coal of soil and rock, crushes it into graded sized chunks (sorting), stockpiles grades preparing it for transport to market, coal needs to be stored at various stages of the preparation process, and conveyed around the CPP facilities. Coal handling is part of the larger field of bulk material handling. Our…
- Read more
-
- Ash Handling System
dry ash conveying
- totally enclosed, dust-tight, air-tight dry drag chain conveyors receive fly ash through seal valves or mate directly to fly ash hoppers. available with single-strand and double-strand chain, top or bottom conveying configurations, horizontal or inclined conveyors up to 35° incline, over 200 ft in length. water jacketed conveyor troughs allow conveying and cooling of ash at temperatures over 1500 degrees…
- Read more
-
- Gas Filters & Pressure Switches
Dungs Gas Filters
- These are available is sizes from 1/2" upto 2" in Threaded Versions. From 1 1/2" and above in Flanged Versions. Available Operating Pressure Range of 200 mbar and 4 Bar.
- Read more
-
- Gas Regulators & Servo Motors
Dungs Pressure Regulators FRS, FRNG, FRN, FRSBV Series
- These are Gas Pressure Regulators used for Regulating the Inlet and Outlet Pressure of the Gas and suitable for different Applications. Max operating pressure allowable is 0.5 bar. Outlet pressure range can be obtained and changed by different Springs available for different Pressure Settings.
- Read more
-
- Gas Filters & Pressure Switches
Dungs Pressure Switches
- These pressure switches are available both for Air and Gas. These are available in different models and suitable for different applications. Popular models are LGW - A2, LGW - A2P, LGW A4, GW - A6, GW- A5 series with different Set Pressure Ranges are available. Other specific models are Weather Proof Versions are available from Dungs Range of Pressure Switches…
- Read more
-
- Safety Release & Slam Shutoff Valves
Dungs Safety Release Valves
- These safety release valves are used to protect the systems from over pressures in the gas trains in the event of sudden overpressures due to closure of solenoid valves So that the when the line is charged with over pressure than the set pressure, it will allow the release of gas from the system and it is recommended to leave…
- Read more
-
- Heating And Pumping Unit
Duplex Model – DPDH – II
- This model has two pumps with motors and two preheaters. While one set of pump and pre heater is operating the other set acts as a stand bye or for alternate use. The filters with model as well as the other models may either be Simplex or Duplex Type.
- Read more
-
- Heating And Pumping Unit
Duplex Model – DPH – I
- This model is supplied with 2 Nos. Motorised rotary gear oil Pump and 1 No. Preheater. One of the pumps is for actual operation and the other is to act as a stand bye or for alternate use.
- Read more
-
- Fuel Handling System
Fuel Handling System
- Being the leaders in the industry, we offer Fuel System to our highly valued clients. This equipment is known to produce high output while consuming less electricity. It is widely used in various industries and is manufactured under the guidance of the team of experts and professionals. Also, it is free of any mechanical errors and is presented at the…
- Read more
-
- Gas Train
Gas Inlet Pressures
- These are made suited as per customer's tailor made requirements and site conditions. Gas Inlet Pressures are ranging from 500mbar upto 16 bar and with Outlet Pressure Ranging from 10 mbar to 500 mbar or higher. Flow Rates upto 2000Nm3/hr available for LPG and CNG.
- Read more
-
- Gas Train & Manifolds
Gas Trains
- In the liquefied petroleum gas (LPG) trade, 'industrial installations' generally refer to the installation at factories and the 'commercial installations' relate to the larger type of catering establishments, such as hotel, restaurants and canteens. These system is allow maximum of 20kg/hr Load because ther is natural vaporization of LPG. In these applications, the LPG installations generally consist of a larger…
- Read more
-
- Gas Multiblock
Gas Trains
- Dungs Double Solenoid Valves and Multiblocs are of modular construction with two valves fitted in series, one Slow Opening and one Fast Opening or both Fast Opening and these are very convenient for Mounting Pressure Switches, Valve Proving Systems etc. These are available in sizes from 3/8" to 5" and from Inlet Pressures of 500mbar and 5 bar. Popular models…
- Read more
-
- Gas Filters & Pressure Switches
Giuliani Anello Gas Filters
- Gas filters are used to Purify the Gas and make it Clean. These facilitate Trouble Free Burner Operation. These are available up to Max Operating Pressure of 6 bar. Available in sizes from 1/2" to 6" in Threaded / Flanged versions.
- Read more
-
- Safety Release & Slam Shutoff Valves
Giuliani Anello Slam Shutoff Valves
- These are slam shutoff valves means that in case of over pressure in the system, this valve will shut the gas in the pipeline and prevent the down stream system from the damage due to over pressure. These are available in sizes from ??" to 6" and with maximum allowable Inlet pressure of gas as 6 bar and shut off…
- Read more
-
- Gas Regulators & Servo Motors
Giuliani Anello, Italy (Now known as Watts Industries)
- Gas Filters are available in sizes from 1/2" to 6" with a maximum operating pressures of 6 bar. Gas Pressure Regulators are available up to 1bar and 4 bar range and up to flow rates of 500Nm3/hr of Natural gas. These are available in different sizes right from 1/2" to 2" in Threaded Versions and from 2" to 4" in…
- Read more
-
- Oil Storage Tank
Main Oil Storage Tank
- Apart from Oil pumping and heating units, Continental manufactures the entire gamut of products required for Oil handling and storage Types of Oils : ● Furnace Oil ● LDO ● Diesel Capacity range : Up to 30,000Lt
- Read more
-
- Gas Train & Manifolds
Manifolds
- - Concept - Manifold means number of cylinders are attached to the single header. - It is the method of distribution of LPG from Cylinder manifold. - LOT means Liquid Off Take and VOT means Vapor Off Take. - LOT Systems are compact and safe which includes connecting Hoses, NRVs, Valves, Piping System, LPG Vaporizer with all Safety Fittings, Pressure…
- Read more
-
- Oil Handling System
Pumping and Heating Units
- In order to ensure an uninterrupted supply of oil to burners for round the clock operation, we offer oil pumping and heating units as per specific customer requirements. Our units are well laid out and compact to ensure supply of oil at a preset temperature and pressure. Stringent checks and in-house quality standards make sure that our units are totally…
- Read more
-
- Heating And Pumping Unit
Simplex Model – SPH
- This essentially consists of 1 no. Motorised rotary gear Oil Pump and 1 No. Preheater.
- Read more
-
- Gas Train
Standard Gas Trains/ Gas Pressure gauge
- We can incorporate the following items in our Standard Gas Trains : Ball Valves, Gas Filters, Pressure Regulator, Gas Pressure Gauge and Pushbutton Cock, Slam Shut off Valve, Safety Release Valve, Solenoid Valves or Multiblocs or DMVD's, Minimum and Max Gas Pressure Switches, Valve Proving Systems. Other specific requirements for ATEX and zone 2 applications can be done by us…
- Read more
-
- Gas Multiblock Spaers
Valve Proving System
- Dungs Valve Proving Systems VPS, VDK, DSLC , VPM Series These valve proving systems are suitable to check and ensure the leak proof ness of MultiBloc Valves used in the system. VDK Series is suitable for testing leak proof ness for two single solenoid valves in the pipeline. DSLC/ VPM Series can be used for system leakage test which is…
- Read more
-
- Ash Handling System
wet ash handling
- a refractory-lined bottom ash chute forms the boiler seal and directs bottom ash to the water-filled upper compartment of the submerged chain conveyor. there, ash is cooled, conveyed, and dewatered for storage or transport. bottom ash conveyors are available in varying sizes and capacities ranging from under 5tph to over 50tph.
- Read more
Menu
Menu
